电气工程施工方案中英文.doc

电气工程施工方案中英文 ，电气施工方案。
。
欢迎下载！
电气安装质量控制点及控制措施  Quality Control Point and Control Measure on Electric Installation
分项工程
Sub-item 质量控制点
Quality Control Point 质量控制措施
Quality Control Measure 备注
Remark
施工准备 Construction Preparation 材料计划、材料送审、施工方案
Material plan, material review and approval, and construction program 认真编制
Work out carefully
明管安装
Open–pipe installation 位置、标高正确、接地良好
The position and elevation are correct, and the grounding is good 绘制综合图及管路接地大样图
Draw integrated drawing and detail of pipeline grounding
桥架线槽安装
Installation on crane span structure slot 标高准确、吊架安装、穿墙、楼板的防火处理、与其它专业管道的间距
Correct level, installation on hanger frame, fire protection treatment of through-wall and floor, clearance with other special pipeline 绘制综合图、吊架安装图、防火处理大样图
Draw integrated drawing, installation drawing of hanger frame, and detail of fire protection treatment
穿线配线
Threading distribution 接线正误、导线涮锡、导线损伤
Wiring correct error, conducting wire with rinsing tin, conducting wire with damage 严格执行接线图、涮锡
穿线时注意保护导线
Strictly carry out wiring drawing, rinsing tin, pay attention to protecting the wire when threading
电缆敷设
Cable lay 电缆平直、固定牢固、电缆弯扁度、标识
Straight cable, firm fixing, cable bending, and identification 落实图纸、规范相关要求
Implement requirements relating to drawing and specification
焊接点
Soldered dot 焊接部位的接地电阻、焊点表面光滑饱满
Ground resistance at welded position, and the surface at welded point is smooth and full 焊接完成后测试焊接部位的接地电阻
Test the ground resistance of welded position after finishing the welding.
器具安装
Appliance installation 位置正确、安装牢固、观感良好
The position is correct and installed firmly, the appearance is good. 按绘制的机电综合图、表面器具布置平面图安装
Arrange the plan installation according to electromechanical drawn integration di
防雷与接地施工 位置正确、安装牢固、观感良好 按绘制的机电综合图、表面器具布 调 电气工 管路暗敷程 Thepositioniscorrectandinstalled置平面图安装 施 器具安装 管内穿线器具安装 工 firmly,theappearanceisgood.Arrangetheplaninstallation Electric管路明敷